Project Description
2PC Trunnion Mounted Ball Valve
2PC Trunnion Mounted Ball Valve
Sizes:DN50~2000mmNPS 2″~48″
Pressure Range:150LB~1500LB
Body Material:WCB,WC6,LCB,WC9,CF8,CF8M,CF3 and CF3M
Soft Seats:PTFE,RPTFE,PEEK,DEVLON,NYLON.
Metal Seats: Tungsten Carbide(TC), Stellited, Ni60.
Temperature:-30ºC~425ºC
Standard :
Design: API6D, BS1414/ASME B 16.34
Face to Face: ASME B 16.10
End Flange:ASME/ANSI B 16.5,
BW End: ASME B 16.25
Test:API598
Fire safe:API607/API6FA
Anti-static NACE MR-01-75.
Double block and bleed design(DBB)
Double stem sealing.
The ball can maintain pressure sealing of pipeline when it is closed or fully opened.
Shorter upper sleeve reducces bearing load and operation torue
Limit device ensures the accurate opening and closing position of the valve
The vall and stem are separated so as to reduce stem load.
The stem adopts anti-blow-out design.
The sealing surface is inserted into te metal seat by polymer or plastic
The metalbacked self-lubricating PTFE bearing and PTFE thrust washers
Reduce the opening torque and prolong the service life of the valve.
Stem leakage can be prevented through the emergency grease fitting.
Application
Refinery
Chemical
Petrochemical
Power plant
Gas
Drive option:
Drive actuators offered for the knife gate valve include handwheel with rising or non-rising stem, or alternatively double or single-acting pneumatic cylinders, Bevel Gear, electric actuators.
Pneumatic Accessories:
Cylinder & Solenoid (FESTO,AirTAC,HERION,ASCO,UNIWO,SMC)/ Positioner(YTC,ABB, SIEMENS,AZBIL)/Filter/ Limit switch(OUMRON,FESTO,IFM,P+F)