Project Description
Pneumatic Round and Square Port Knife Gate Valve
Normal Features
Sizes:DN 50~600mm NPS 2”-24”
Body Material: WCB/CF8/CF8M/CF3/CF3M
Gate: 2Cr13/ 304/304L/316/316L
Sealing Material:
NBR:90°C EPDM: 120°C
Viton: 200°C PTFE: 200°C
Metal seal :304/316+Satellite
Design Standard: MSS SP81
Max Working pressure:
DN50~DN250:10Bar NPS2~NPS10:150Psi
DN300~DN450: 7Bar NPS12~NPS18:90Psi
DN500~DN600: 4Bar NPS20~NPS24: 60Psi
Working Temperature: -29°C ~120°C
Standard flange connection:
ANSI B16.5 (class 150);
EN1092-1:2001 PN6/10/16/25;
AS2129; ASME B16.47 A Series.
The Pneumatic Round and Square Port Knife Gate Valve is a uni-directional valve which shutoff medium directly.The beveled knife-like edge cuts through fibers and solid particles in the flow stream. Operated by manual,pneumatic or electric actuators, knife gate valve is widely used in the industry application such as Pulp and Paper,Power plants,Wastewater treatment plants,Chemical plants,Iron and Steel Industry,Food and Beverage,Bulk handling,Mining,etc.
Body:
- Two-piece body structure design.
- Fixed guid claw,no groove design,the solid would not be accumulated and stuck.
Gate:
- The slide gate has a bevelled cutting edge. As a result, solids can be cut through, achieving a tight seal in the closed position.
- On request, the thickness of the knife gate valves gate can be increased for higher operating pressures and/or higher quality material can be used.
Seat:
- Side entry and replaceable seat design,can be changed freely.
- The seat ring retainer avoid flow fluid flushing the seat ring.
- Material of seat is selected according to the meduim and service convice condition,choosing metal seal or soft seal.Metal seal is 304+stl or 316+stl.Soft seats are PTFE,EPDM,NBR,which have good sealing performance.
Test:
- Body test: Working pressurex1.5
- Seat test: Working pressurex1.1
Application:
knife gate valve is widely used in the industry application such as Pulp and Paper,Power plants,Wastewater treatment plants,Chemical plants,Iron and Steel Industry,Food and Beverage,Bulk handling,Mining,etc.
Drive option:
Drive actuators offered for the knife gate valve include handwheel with rising or non-rising stem, or alternatively double or single-acting pneumatic cylinders, Bevel Gear, electric actuators.
Pneumatic Accessories:
Cylinder & Solenoid (FESTO,AirTAC,HERION,ASCO,UNIWO,SMC)/ Positioner(YTC,ABB, SIEMENS,AZBIL)/Filter/ Limit?switch(OUMRON,FESTO,IFM,P+F)
Electrical Motor Actuator:
Actuator Make – Rotork, Auma, ACT, Antrieb etc.